Traeger grills are a popular choice for many people who enjoy outdoor cooking.
The Traeger brand is known for its high-quality products and innovative technology, which make it easy to grill your favorite foods at home.
The auger is an important part of any pellet smoker or grill because it controls the flow of fuel into the firebox.
If your auger isn’t turning properly, then you may have trouble getting enough heat to cook your food correctly or even lighting up at all!
Common Causes of Auger Not Turning
Low Battery
If your auger is not turning, it’s possible that the battery is low and needs to be charged.
If you have a Traeger Pellet Grill with a digital display, press the “INFO” button on your remote control to check the remaining charge in your batteries.
If there is less than 20% remaining, plug in your charger and allow it to fully charge before using again (this can take up to 8 hours).
If there is no indication of any power left at all or if this happens frequently when using your grill, then replace both batteries with new ones immediately!
Step-by-Step Guide to Troubleshooting
- Check the battery. The auger won’t turn if the battery isn’t charged, so make sure it’s fully charged before you use your Traeger grill.
- Clean out the auger tube and remove any debris that may be blocking it from turning properly.
- Test the thermostat by placing an oven thermometer inside of your grill with a probe in each chamber; if one reads higher than another, this could mean that something is wrong with either the control board or igniter (see below).
- Inspect all wires leading from both sides of your Traeger’s control board; if any look frayed or worn down, replace them immediately! If that doesn’t solve things for you, move on down to step five…
Tools Needed for Troubleshooting
If you’re having trouble with your auger, here’s what you’ll need:
- Screwdriver
- Pliers (needle-nose pliers are best)
- Wire brush for cleaning debris out of the auger housing. You can use an old toothbrush if you don’t have one on hand, but a wire brush will work better since it has more scrubbing power and won’t get stuck in small crevices like a toothbrush might.
You may also want to invest in some multimeter testing equipment if this is something that happens frequently.
Safety Precautions
- Always disconnect the grill from power.
- Use protective gear, including gloves and eye protection.
- Be aware of hot surfaces, which can cause burns or fires if touched by bare skin.
Troubleshooting Tips
If the auger isn’t turning, there are a few things you can check. First, make sure that the control board isn’t corroded. If it is, you’ll need to replace it.
Also check for loose wires or connections at this time. After that, use a vacuum cleaner attachment (or just blow into) and clean out any dust or debris from inside the auger tube itself.
Preventative Maintenance
- Clean the auger tube regularly. The auger tube is the part of your Traeger that moves food from one side to another, so it’s important to keep it clean. If you notice any buildup inside of your grill, use a brush or scraper to remove it before starting up again.
- Check the battery periodically. You should test your batteries at least once per month–and more often if you use your grill frequently–to make sure they’re charged enough for a full day’s work!
- Inspect the control board for corrosion and damage caused by water leaks (if any).
When to Contact a Professional
If you still cannot get your Traeger auger to turn, it’s time to contact a professional.
If you have tried all of the troubleshooting tips above and the auger still does not turn, then there may be something wrong with your control board or igniter. The best thing to do is call Traeger customer service.
Conclusion
So, you’ve got a Traeger auger that’s not turning.
Before you panic, remember that this is a common issue and there are several things you can do to troubleshoot the problem and get your grill back up and running again.
First, make sure the auger motor is plugged in and turned on. If it still won’t turn, check the cord for damage or wear if any of these things are present, replace them before trying again!