After a big BBQ during which your grill has been utilized, you might want to make sure it’s clean before using it again.
The combination of ash, grime, and dampness may be a little corrosive when left on the grill for an extended period of time.
You’re in for a treat if you want to learn how to clean a PK grill properly!
In this post, I’ll give you a quick rundown of how to clean and maintain your prized PK Grill for as long as possible. Let’s get started!
Step 1: Check to see whether the grill is cold to the touch.
When it comes to grilling, the most important thing to think about is your safety.
When you’re ready to clean your barbecue, first make sure it’s completely cooled down. You must remove all the still-burning coal from the grill and verify that all ash and oils have solidified.
If you’re confident the grill is cool to the touch, just go straight to the next stage.
Step 2: Get All of the Required Equipment and Materials for the Cleanup
While you wait for the grill and ashes to cool down completely, you may use the time to ready the tools and essential supplies for the task.
This saves you time by eliminating the back and forth cleaning, as well as making your task much easier.
You’ll need the following items to clean your grill:
- A water hose to a source
- A good location outside where you can use a garden hose
- Rags that are clean and dry
- A biodegradable, non-toxic degreaser, such as Stanley Degreaser Concentrate or Grab Green Kitchen Power Degreaser
- Brush for scrubbing
- Oil used for cooking
Step 3: Remove and Clean the Grilling Grid Separately
Remove the grill grid to clean it after everything is prepared for cleanup.
When it comes to grilling, there are a few things you should keep in mind. While on the grill, avoid cleaning the grill grids since liquids used may wet the ash, making it sticky and difficult to remove.
Remove the grid and, after allowing it to cure and loosen the filth for a while, apply some of the degreaser all over and work it in. You may go on to the next stage while cleaning the grill.
Step 4: Remove Any Coal or Dripping Baskets
Remove the ash once it has been revealed so that you can properly clean the stove. The simplest method to accomplish this is to use a shop vac or a vacuum device.
However, if you have a charcoal basket, emptying the ash in a bag is quite simple. If you use any, remove and dispose of the dripping basket as well.
If you have a dripping basket, you’ll need a bottom grid to keep it from sliding all over the place. This one should not require cleaning very often.
When it’s time to clean the grill grate, remove it and follow the same cleaning procedure as the grilling grate.
Step 5: Wipe the Grill Lid and Coal Chamber
Ideally, you shouldn’t clean the inside of the grill to preserve the seasoning, which is crucial for accurate temperature control while grilling.
Some may advocate the use of a wire brush for this task. However, this can scratch and dull the aluminum finish. A simple cleaning with a clean cloth should enough in most cases.
The oils and fats will accumulate on the outside of these two chambers with time, forming a layer of filth that may harm cast aluminum.
That’s because cast iron is porous, so when you apply a non-stick cooking spray or some of the nontoxic biodegradable degreasers to the grill’s exterior, it allows the grime molecules to break down for around 2 to 3 minutes.
To access the grill more readily, it’s also advised that you remove the legs from the frame.
In the meantime, clean your grilling grid from step 2. Scrub the grid using a scrubbing brush to get it as clean as possible. Remove any grease on the grill’s outside by scouring it with a cleaning brush.
Step 6: Allow All Cleaned Parts to Dry Completely with Water
To get all the filthy gunk off the grill, simply hose it down with gallons of running water once everything is cleaned up properly.
The rain gutters and drains should be free of debris.
After you’re done cleaning the grill, wipe it down with a clean cloth to dry it or leave the removed parts air drying while you continue your cleaning.
Step 7: Clean the legs of the table, and any remaining accessories.
You may use the scrubbing brush to clean the legs of the grill, but only if they are quite dirty.
The same goes for any additional accessories you attach to the grill. Remember to rinse everything under your water hose, including the legs and any other attachments.
Step 8: Put the Clean Grill Components Back Together
Take out the folded grilling grid, replace it with the grill chambers, and return them to their original positions. To keep your grill safe from rain and snow, store it in your garage or shed.
Step 9: Clean and Polish the Grill’s Surface
Finally, you may complete the job by polishing the aluminum to keep the outside of your grill looking nice.
Conclusion Clean a PK Grill
That’s all there is to it! Here’s what you need to know in order to clean your PK Grill.
You’ll be able to clean every aspect of the sink and countertop with ease. As you can see, the cleanup procedure is simple and does not take longer than 10 minutes.
Ideally, you should clean your grill every time you use it to ensure that it lasts a long time, although vacuuming the ashes and cleaning the outside is acceptable for a few uses.