Fog Machine Pump Not Working: 2 Common Fixes

Fog machines are a popular tool used in various events for their ability to create an eerie and dramatic atmosphere.

However, a malfunctioning fog machine pump can put a damper on any event. Fortunately, there are two common fixes for a fog machine pump not working that anyone can do with a little bit of know-how.

Fixing a Dirty and Clogged Fog Machine Pump

One of the most common causes of a malfunctioning fog machine pump is a dirty and clogged pump. Here are the steps to fix it:

Step 1: Open and Remove the Cover of the Pump

The first step is to remove the cover of the pump. This can usually be done by unscrewing a few screws or clips. Make sure to take caution and refer to the manufacturer’s instructions before opening the pump.

Step 2: Check the Nozzle and Unclog the Pinhole

Once the cover is removed, check the nozzle for any clogs. If there is a clog, use a needle or pin to unclog the pinhole. Be careful not to damage the nozzle while doing so.

Step 3: Open the Interior of the Pump

Next, open the interior of the pump and check the pump for any other clogs. Take note of any parts that may be damaged or worn out.

Step 4: Disassemble and Clean the Pumping System

If there are any clogs in the pumping system, disassemble the system and thoroughly clean each part. Make sure to dry the parts completely before reassembling the pump.

Fixing a Worn Out Pump in a Fog Pump Machine

Another common cause of a malfunctioning fog machine pump is a worn-out pump. Here are the steps to fix it:

Step 1: Dismantling the Worn Out Pump

The first step is to dismantle the worn-out pump. This can usually be done by unscrewing a few screws or clips. Be careful not to damage any parts while doing so.

Step 2: Find Materials for Repairing The Pump

Once the pump is dismantled, find the necessary materials for repairing the pump. This may include replacement parts or materials for modifying the pump.

Step 3: Correct the Output Voltage Using a Transformer

Correct the output voltage using a transformer to ensure that the pump is operating at the correct voltage.

Step 4: Modify the Pump

Modify the pump by replacing any worn-out parts or making necessary adjustments to the pump.

Step 5: Design an Adapter

Design and create an adapter to ensure that the modified pump fits securely back onto the fog machine.

Step 6: Connect the Transformer to the Modified Pump

Connect the transformer to the modified pump to ensure that it’s operating at the correct voltage.

Step 7: Mount the Pump on the Fog Machine

Finally, mount the pump back onto the fog machine, ensuring that it’s securely in place.

Conclusion

A malfunctioning fog machine pump can put a damper on any event, but with these two common fixes, anyone can repair their fog machine pump.

Always practice caution and refer to the manufacturer’s instructions when working on machinery. Remember to try these fixes before seeking professional help.

With a little bit of know-how, a malfunctioning fog machine pump can be fixed in no time, ensuring a successful and dramatic event.

FAQ

How does a fog machine pump work?

A fog machine pump works by creating pressure to force fog fluid through a heating element, which then produces fog.

How do I unclog my fog machine?

To unclog your fog machine, you can check the nozzle for any clogs and use a needle or pin to unclog the pinhole. You can also disassemble the pump and thoroughly clean each part.

Do fog machines clog up?

Yes, fog machines can clog up due to the buildup of fog fluid and other particles.

Do you need distilled water for a fog machine?

It is recommended to use distilled water for a fog machine to prevent any mineral buildup that can clog the machine.

How long does it take for a fog machine to start producing fog?

It typically takes a few minutes for a fog machine to start producing fog after turning it on.

Do you need to prime a fog machine?

It is not necessary to prime a fog machine, but it is recommended to let it warm up for a few minutes before using it.

How long does a fog machine last?

The lifespan of a fog machine depends on the frequency of use and maintenance. With proper care, a fog machine can last for several years.

Is it OK to put water in a fog machine?

It is not recommended to put water in a fog machine as it can damage the machine and affect the quality of the fog produced.

Does fog machine solution go bad?

Yes, fog machine solution can go bad over time. It is recommended to check the expiration date and store the solution in a cool, dry place.

How can I make my low lying fog machine work better?

To make your low lying fog machine work better, you can use dry ice instead of regular ice or use a chiller to cool the fog before it’s released.

Why put ice in a fog machine?

Putting ice in a fog machine can help cool down the fog produced, resulting in a denser and longer-lasting fog.