You might have heard of Traeger paint, but do you know what it is? It’s a type of paint that’s used in the construction industry to create a durable finish on concrete floors.
The problem with this type of paint is that it can chip and peel off after only a few years in some cases.
This can cause serious problems for homeowners who want their home to look great for years to come.
If you’re thinking about buying a house with traeger painted floors, then it’s important to understand how these issues occur so that you can make an informed decision about whether or not this kind of property is right for you.
Types of Traeger Paint
There are many different types of paint that can be used on a Traeger. The most common are oil-based, latex, acrylic and enamel. Each type has its own advantages and disadvantages.
Oil-Based Paint: Oil-based paints are the oldest form of paint available today. They are made from linseed oil or another type of vegetable oil as their base ingredient which gives them their name “Oil”.
Because this type of paint dries slowly it requires more time than other types to cure before you can use your grill again but once it does cure it becomes very durable and lasts for years without needing to be re-coated like other types do after time passes by.
Latex Paint: Latex is considered one of the best options when choosing what kind of material should go onto your Traeger because not only does it dry quickly but also leaves behind little residue on surfaces which means less clean up after each use!
However there are some downsides such as cracking over time due to temperature changes during cooking processes so if this happens simply reapply another coat until everything looks good again!
Acrylics/Enamels: These two terms refer specifically towards paints made up primarily outta acrylic resin along with other additives such as pigments.
But don’t worry too much about those details because there really isn’t anything special here except maybe cost efficiency wise since these tend not cost nearly as much compared against other alternatives such as latexes/enamels.
Common Traeger Paint Issues
- Peeling
- Chipping
- Flaking
- Fading
- Blistering (discoloration) and Cracking
Causes of Traeger Paint Issues
There are many reasons why your Traeger paint may have issues. The most common is improper surface preparation, which can lead to chipping and peeling. Other causes include:
- Poor quality paint
- Humidity
- Temperature
- UV exposure
Preventing Traeger Paint Issues
The most important thing you can do to prevent Traeger paint issues is to properly prepare your surface.
This means cleaning it and sanding it down until it’s smooth, but it also means making sure that the wood has been sealed with something like polyurethane or lacquer.
The wood needs to be protected from moisture so that when you apply the paint, there aren’t any cracks in which water can seep into and cause peeling.
You should also use high quality paint products that are designed specifically for outdoor use on Traeger grills (and other outdoor furniture).
These paints have UV protection built into them so they won’t fade over time due to exposure from sunlight which is especially important if you live somewhere hot where temperatures reach above 70 degrees Fahrenheit regularly throughout most of summertime!
You may need multiple coats depending on how much coverage is needed.
Make sure each coat dries completely before applying another one so no moisture gets trapped beneath layers of wet paint which could lead towards bubbling later down road (which looks terrible).
Repairing Traeger Paint Issues
If you have paint issues on your Traeger, there are a few things that you can do to repair it.
First, clean off any dirt or debris from the surface of your grill. Then sand down any rough areas with fine-grit sandpaper. You can also use steel wool if they’re not too deep in their damage.
Next, fill in any cracks or holes with wood filler or putty and let it dry completely before continuing on to step 4.
Next comes priming! This will help seal up any small cracks or holes left behind by repairing them so they don’t continue leaking smoke into your food later on down the line when cooking again after painting over them (which would be bad).
It also provides an extra layer of protection against rusting while allowing for better adhesion between layers of paint during final painting steps later on down this list too!
Finally once everything has been primed properly using high quality primer designed specifically for metal surfaces such as aluminum ones found inside grills like Traegers.
Then we move onto actual painting itself which involves applying multiple coats until desired coverage level achieved.
Tools for Repairing Traeger Paint Issues
- Paint scraper
- Sandpaper
- Putty knife
- Primer (if needed)
- Paintbrush
Common Mistakes to Avoid
- Not cleaning the surface.
- Not sanding the surface.
- Not priming the surface.
- Using cheap paint that doesn’t adhere well to wood or metal, which can cause peeling and flaking in time.
Conclusion
The Traeger paint issue is a common problem that can be avoided with proper care. It’s important to understand the signs of this defect and how you can prevent it from happening to your grill.
If you’re worried about your Traeger grill, call the experts at [company name]. We’ll inspect your grill and let you know if there are any issues with its paint quality.
